manualshive.com logo in svg

Brocade Communications Systems X6-4, Руководство по установке оборудования, Страница: 2 / 249

Поделиться
Скачать
Brocade Communications Systems X6-4 Скачать руководство пользователя страница 2

©

 2017, Brocade Communications Systems, Inc. All Rights Reserved.

Brocade, the B-wing symbol, and MyBrocade are registered trademarks of Brocade Communications Systems, Inc., in the United States and in other
countries. Other brands, product names, or service names mentioned of Brocade Communications Systems, Inc. are listed at 

www.brocade.com/en/legal/

brocade-Legal-intellectual-property/brocade-legal-trademarks.html

. Other marks may belong to third parties.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment,
equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without
notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade
sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the
United States government.

The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this
document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.

The product described by this document may contain open source software covered by the GNU General Public License or other open source license
agreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and
obtain a copy of the programming source code, please visit 

http://www.brocade.com/support/oscd

.

Brocade X6-4 Director Hardware Installation Guide

2

53-1004106-07

Содержание X6-4


























































































































































































































































Отзывы:

Нет отзывов