Brocade Communications Systems X6-4, Руководство по установке оборудования, Страница: 78 / 249

3. Enter the date command, using the following syntax:
date "mmddHHMMyy"
The values are:
•
mm is the month; valid values are 01 through 12.
• dd is the date; valid values are 01 through 31.
• HH is the hour; valid values are 00 through 23.
• MM is minutes; valid values are 00 through 59.
• yy is the year; valid values are 00 through 99 (values greater than 69 are interpreted as 1970 through 1999, and values
less than 70 are interpreted as 2000 through 2069).
switch:admin> date
Fri Sep 28 17:01:48 UTC 2016
switch:admin> date "0927123016"
Thu Sep 27 12:30:00 UTC 2016
switch:admin>
Setting the time zone
The default time zone is Coordinated Universal Time (UTC). The time zone needs to be set only once because the value is stored in
nonvolatile memory. Use the following procedure to set the time zone. The time zone change will take affect after the next system reboot.
1. Log into the device using one of the following methods:
• A serial console connection to the active CP blade. The active CP is indicated by an illuminated blue LED on the blade front
panel.
• A Telnet session using the chassis management IP address.
2. Log into the device using admin . If you have not changed the default password, use password .
Setting the date and time
Brocade X6-4 Director Hardware Installation Guide
78 53-1004106-07