manualshive.com logo in svg

Brocade Communications Systems X6-4, Руководство по установке оборудования, Страница: 19 / 249

Поделиться
Скачать
Brocade Communications Systems X6-4 Скачать руководство пользователя страница 19

FIGURE 2 

Nonport side of the Brocade X6-4 Director (sample configuration)

1.

WWN bezel (logo plate - WWN cards behind)

2.

Power supply assembly

3.

Fan assembly

4.

2AWG Panduit LCD2-14AF lug for building ground connection

Depending on fans and power supplies installed, airflow can be from the port side to the nonport side or the nonport side to the port side
of the chassis through the side air vent. Use the Chassis Airflow Diversion and Port Side Exhaust Kit to divert airflow so that air fully
exhausts to the port side of the chassis or is fully drawn from the port side of the chassis while mounted in a four-post rack.

Although not illustrated, the chassis label containing the serial number, SKU, and WWN is located on the upper portion of the chassis to
the left of the fan assemblies.

Nonport-side view of the device

Brocade X6-4 Director Hardware Installation Guide

53-1004106-07

19

Содержание X6-4


























































































































































































































































Отзывы:

Нет отзывов