manualshive.com logo in svg

Brocade Communications Systems X6-4, Руководство по установке оборудования, Страница: 232 / 249

Поделиться
Скачать
Brocade Communications Systems X6-4 Скачать руководство пользователя страница 232

Model name

@100 VAC input

@200 VAC input

@-48 VDC input

Minimum number of power supplies

Notes

One power supply provides system
power, but two must be installed to
provide power efficiency and redundancy.

Brocade X6-8

1515 W

5171 BTU/hr

1481 W

5055 BTU/hr

Not supported

3 power supplies for AC low line (100–
120 VAC)

2 power supplies for AC high line (200–
240 VAC)

Two power supplies provide system
power, but 3 or 4 must be installed to
provide power efficiency and redundancy.

Brocade X6-8 fully
loaded: 2 CP blades,
2 CR blades,
8 FC32-48 port blades,
3 fan assemblies

Power consumption for AC power supplies (maximum

configuration)

The maximum power consumption configuration features fans at maximum speed and the FC32-48 blade installed with optics. Traffic is
at full-line rate, smallest packet is 64-bytes, 40°C (104°F) ambient temperature, and maximum power for all supported optics. Does not
include the power draw for the SX6 extension blade.

Model name

@100 VAC input

@200 VAC input

@-48 VDC input

Minimum number of power supplies

Notes

Brocade X6-4

2438 W

8322 BTU/hr

2385 W

8139 BTU/hr

N/A

2 for AC low line (100–120 VAC)

1 for AC high line (200–240 VAC)

One power supply provides system
power, but two must be installed to
provide power efficiency and redundancy.

Brocade X6-4 fully
loaded: 2 CP blades,
2 CR blades,
4 FC32-48 port blades,
2 fan assemblies

Brocade X6-8

4339 W

14810 BTU/hr

4244 W

14485 BTU/hr

N/A

3 for AC low line (100–120 VAC)

2 for AC high line (200–240 VAC)

Two power supplies provide system
power, but 3 or 4 must be installed to
provide power efficiency and redundancy

Brocade X6-8 fully
loaded: 2 CP blades,
2 CR blades,
8 FC32-48 port blades,
3 fan assemblies

Power consumption for HVAC/HVDC power supplies

(typical configuration)

The typical power consumption configuration features fans at nominal speed and the FC32-48 port blade configured with optics
operating at 50% line rate and random packets (does not include the power draw for the SX6 extension blade).

Model name

@240 VDC
input

@ 100 VAC
input

@380 VDC input

@ 240 or 277 VAC
input

Minimum number of power supplies

Notes

Brocade X6-4

1361 W

4645 BTU/hr

1332 W

4546 BTU/hr

1 power supply for DC input (192-400 VDC)

2 power supplies for AC low line (100–120 VAC)

1 power supply for AC high line (200–277 VAC)

Brocade X6-4 fully
loaded: 2 CP blades,
2 CR blades,

Power consumption for AC power supplies (maximum configuration)

Brocade X6-4 Director Hardware Installation Guide

232

53-1004106-07

Содержание X6-4


























































































































































































































































Отзывы:

Нет отзывов