30
31
Mode.
•
Determine the value of CV 17 and CV 18 for your Extended Address
from the ID Table in your
Steam Model Specification Sheet
or follow
instructions in CV 17 and CV 18 in the
Quantum DCC Reference
Manual (Version 3)
to calculate a different ID number.
•
Set CV 49 to 129.
•
Set CV 50 to 17.
•
Set CV 56 to the value of CV 17 from the table. There will be no
verbal response.
•
Set CV 50 to 18.
•
Set CV 56 to the value of CV 18 from the table. Hear the new full
Extended Address spoken out.
•
Set CV 29, bit 5 to ‘1’ (or set CV 29 to 38
42
)
to allow operation with
your new Extended Address.
Disable/Enable Verbal Announcements (CV 62)
In Ops mode, Quantum will automatically speak out the value of the CV
you enter.
•
To disable set CV 62 to 0
43
; to enable set CV 62 to 1. Default is
Enabled.
CV Inquiry with Verbal Feedback in Ops Mode (CV 64)
44
To inquire about the current value of any CV through Verbal Feedback in
Ops Mode:
•
Set CV 64 to the CV you wish to query. Hear the verbal message “CV
‘X’ equals ‘Y’”, where ‘X’ is the CV number and ‘Y’ is the value.
Note:
If the CV has a Primary Index such as CV nn.mm (where nn is the CV
number and mm is the Primary Index), set CV 49 to mm before you set CV
64 to nn. For example, if you want to inquire about the Bell Volume, which
is CV 52.8, set CV 49 to 8 and set CV 64 to 52. You will hear, “CV five two
point eight equals ‘Y’ (where ‘Y’ is the current value).
Note:
If you enter either ‘17’ or ‘18’ in CV 64, you will hear the full Extended
Address ID number spoken out.
