28
29
Changing Individual Sound Volumes (CV 52.X
35
)
To change the volume of Individual Sounds listed in the table below do the
following
36
:
•
Set CV 49 to the Primary Index for the individual sound from the table
below.
•
Enter Volume level in CV 52 as follows: “0” = No sound, “1 – 15” sets
volume from the lowest level at “1” to the highest at “15”, with volume
levels at 2db increments.
Primary Index entered
into CV 49
Sound
0
Whistle
8
Bell
10
Chuff 1 (steam exhaust)
11
Chuff 2
37
16
Pump 1
38
17
Pump 2
19
Blower (hiss)
21
Long Air Let-off
22
Short Air Let-off
24
Squealing Brakes
26
Dynamo
29
Boiler Pop-off
30
Boiler Blow down
31
Water Injector
34
Coupler Sounds
See your
Steam Model Specifications
sheet for Individual Sound
Volume default settings.
Chuff Interval Scale Factor (CV 56.12)
If the Chuff Sound is not exactly four per revolution or you want to
change it to some other value, use the following procedure to change
the Chuff interval
39
.
