Broadway Limited Steam Locomotive Скачать руководство пользователя страница 14

Страница: 14 / 50

shutting off and reapplying track power.

Once you perform the three Bell operations after applying power, the Bell

will shut off automatically and you will hear “Enter Programming”

and the

Headlight and tender Reverse Lights will flash alternately off and on.

Scrolling through the Program Options

•

After entering Programming, you will hear an announcement of the

first Program Option, “Option 1 - System Volume”.

•

To access other Program Options, simply flip the direction switch

to the opposite position and leave it there. Listen as each option

number is announced in order.

•

Flip the switch back and leave it there when you wish to stop at a

particular option. After you stop at an option you will hear the option

number and name announced. When you are scrolling through and

stopping at Program Options,

you are not making any changes

. To

make changes you must actually

enter

the Program Option.

Note:

If you accidentally go to a higher option number other than the one

you wanted, simply turn the power off, re-enter Programming and start

again. Once you reach the last Program Option, it will continue to announce

the last option number.

Entering a Program Option and Making Changes

After the verbal announcement of a Program Option, you can enter

that option by performing a

Slow

Quick

flip-and-back operation of

the direction switch. Upon entering a Program Option, you will hear the

current setting for that option. For unused Program Options, you will hear

“Reserved”. For any volume option, you will hear “Volume equals X” (where

“X” is its current volume level setting). After a moment, you will hear the

sound playing at its current volume

Note:

Entering a Program Option does not change the settings for that

option; it only provides information about its current value. After entering

the Program Option, additional

Slow

Quick

flip-and-back operations

will program new settings as described in the above table. For all level

adjustments, a

Quick

operation will decrease one level while a

Slow

operation will increase one level.

Note:

Since “System Volume” is the first Program Option, you can use

Quick

Slow

operations immediately after entering Programming to

Содержание Steam Locomotive



















































Результаты поиска

Содержание Steam Locomotive

Отзывы:

Похожие инструкции для Steam Locomotive

Бренды по названию

Популярные бренды

Broadway Limited Steam Locomotive, Руководство оператора

Результаты поиска

Содержание Steam Locomotive

Отзывы:

Похожие инструкции для Steam Locomotive

Бренды по названию

Популярные бренды