Brink Air Comfort, Правила установки

Страница: 22 / 50

5.2.1 Installing Renovent Excellent on Air Comfort
The Air Comfort appliance can be combined with two different models of heat recovery units:
Renovent Excellent 4/0:
▪
The right-hand version of the Air Comfort with a left-hand or right-hand version of the Renovent Excellent 4/0.
▪
The left-hand version of the Air Comfort with a left-hand or right-hand version of the Renovent Excellent 4/0.
Renovent Excellent 3/1:
▪
The right-hand version of the Air Comfort with a right-hand version of the Renovent Excellent 3/1.
▪
The left-hand version of the Air Comfort with a left-hand version of the Renovent Excellent 3/1.
The Renovent Excellent can be installed on top of the Air Comfort appliance.
Always use the siphon set with article number 217052 if a Renovent Excellent heat recovery unit
is installed on top of the Air Comfort appliance.
See section Condensation discharge when using Renovent Excellent (op pagina 24) for connecting the
condensation discharge.
q
q
w
q
q
e
Top of Air Comfort
1. Indentation in upper plate
2. Break-off section
3. Break-off section
Place the Renovent Excellent 4/0 on top of the Air Comfort:
1. Remove the break-off section (3) from the top plate of the Air Comfort.
2. Remove the insulation that is released.
3. Stick the 4 black buffers from the siphon set onto the indentation (1) of the top plate of the Air Comfort.
4. Stick the sealing tape of the siphon set over the edge of the break-off opening (3).
5. Remove the 4 rubber buffers below the Renovent Excellent 4/0.
6. Place the Renovent Excellent on the Air Comfort in such a way that the protective covers are located at the
front in 1 section.
Air Comfort 614788-B