Boston Whaler 280 Dauntless, Руководство пользователя

Страница: 72 / 163

3-2
Chapter 3 • Systems Overview and Operation
R
280 Dauntless
Engine(s) Warm Up
The THROTTLE ONLY button (see
Figure 3.3.1) on the throttle and shift
control allows the operator to increase
engine RPMs for warm-up without
being in gear. To operate:
1. Ensure throttle and shift levers are
in neutral.
2. Press THROTTLE ONLY button.
3. Advance port throttle and shift
lever to increase engine RPMs to
warm engines. RPMs are limited
in throttle only mode to prevent
engine damage.
4. To disengage, return port throttle
and lever back to neutral position.
5. Press THROTTLE ONLY button
to turn off.
Boat Shut-down
1. Make sure the boat is securely
moored to the dock before shutting
down the engine.
2. Move throttle and shift control to
the neutral position.
3. Press START/STOP ALL ENGINES
button to stop engines (see Figure 3.3.1).
4. Before leaving vessel be sure turn ignition switch(es) inside console storage/head to the
OFF
position.
5. Press up on the ENGINES battery switch for five seconds and release.
REFER TO THE ENGINE MANUFACTURER’S MANUAL IN OWNER’S PACKET FOR COMPLETE
INSTRUCTIONS AND WARRANTY INFORMATION.
Throttle and Shift Control
The throttle and shift control is used to manage both the shifting mechanism and the throttle (see Figure 3.3.1).
This control regulates engine RPMs, which controls the speed of the boat. Moving the lever forward shifts the
engine(s) into forward gear. Continuing to move the lever forward progressively increases the forward speed
of the boat. Moving the lever backwards shifts the engine(s) into reverse gear, and continuing to move the
lever back progressively increases the reverse speed of the boat. The lever(s) must be in the neutral position
to start the engine(s). When in neutral, otherwise known as the idle position, the propeller is not engaged. A
neutral indicator light is illuminated atop the throttle and shift lever when in neutral.
REFER TO OWNER’S PACKET FOR COMPLETE INSTRUCTIONS AND WARRANTY INFORMATION.
Helm
Figure 3.2.1
1 Engine emergency stop switch 3 Lanyard
2 Throttle and shift control 1
1 NOTE: Dual engine throttle and shift shown.
2
1
3
RUN
OFF