BOSS
TM
X-POT6+ Operation & Maintenance Manual
(V1.2 September 2017)
Page 6
PuRPose & use oF
thIs mAnuAL
The following pages list the information, specifications, measures and technical data that
allow the relevant personnel to use this product safely and for the intended purpose.
Responsible persons or those engaged by them carrying out the required services
must read this manual attentively and understand it. Such services include: storage,
transportation, installation, electrical installation, commissioning and re-starting, operation,
maintenance, inspection, repair and dismantling.
Where the product is to be used in plants/facilities which do not comply with harmonized
European regulations and relevant technical rules and guidelines of professional
associations for this field of application, the present document is purely for informative
and reference purposes. As this unit may be subject to unlimited inspection at all times,
this manual must be kept in the immediate vicinity of the installed unit, at least within the
confines of the operations room.
QuALIFICAtIons ReQuIRed,
AssumPtIons
All personnel must have relevant qualifications to carry out the required services, and be
physically and psychologically capable.
Operating instructions are transferred by BSS Industrial representatives or others assigned
by them during delivery negotiations or on demand. Training for the required services,
installation, dismantling, commissioning, operation, inspection, maintenance and repair
remain the responsibility of VEXO
®
or their nominated service partners. Such training
covers information about on-site requirements rather than performance.
On-site requirements include logistics, manual handling, and the preparation of an
installation location with the requisite foundation engineering to accommodate the unit,
and the requisite hydraulic and electrical connections, the electrical installation for the
power source of the equipment and installation of the BMS signal leads if required.
APPRoPRIAte use
This equipment is designed for use on sealed and un-sealed thermal systems (heating,
chilled and condenser water). It is designed to remove particulate debris from the system.
The maximum operating limits of this equipment are stated on the data labels affixed to
each unit.
suPPLIed Goods
The items delivered must be compared against the items listed on the shipping note and
inspected for conformity. Unpacking, installation and commissioning may be started only
once the product has been checked as conforming with the intended use. In particular,
exceeding the permissible operating or design parameters may lead to malfunctioning,
component damage and personal injury.
If not in line with conformity statement or if the delivery is incorrect in any other way, the
product must not be used.
