Bosch SE3000 Series, Техническое справочное руководство

Страница: 108 / 256

108 en | Troubleshooting coordinators, points and receivers Security Escort
2018.03 | SE3v1.0 | DOC Technical Reference Manual Robert Bosch (SEA) Pte Ltd
Element Usage/Description
Output includes
transmitter ID If this checkbox is selected, any time the system prints or displays
text for an alarm or test, the transmitter ID number will also be
displayed. Otherwise the transmitter ID will not be shown.
Typically, this checkbox would not be selected.
Limit alarms to 1
transponder This checkbox should not be selected. It is used only in a system
where all transponders operate in areas that are separate from
each other. It would prevent all interactions between SE receivers
on different transponders. Typically, this would be very undesirable
and there is now a selection on an individual transponder basis to
accomplish this feature.
Limit alarms to one
area This checkbox should not be selected. It is only used in a system
where all transponders operate in areas that are separate from
each other.
Man down Alarm On
Auto track If this checkbox is selected, any time there is a man down alarm,
the auto track functionality will be activated. Otherwise there is no
auto track functionality for the alarm.
Require alarm report If this checkbox is selected, the operator will be prompted to
complete an alarm report when the alarm is reset from the screen.
If the responding officer is required to complete the report, or if no
system report is desired, this checkbox should not be selected. If
the operator should complete the report, then select this
checkbox.
Security alarms silent If this checkbox is selected, alarms transmitted by "Security" or
"Watchman" transmitters are to be “silent”, alerting the operator at
the Central Console, but not sounding the sirens of the Alert Units
or the sounders in the SE receivers.
Installer alarms silent If this checkbox is selected, alarms transmitted by transmitters
issued to installing company representatives and visitors are to be
“silent”, alerting the operator at the Central Console, but not
sounding the sirens of the Alert Units or the sounders in the SE
receivers. Typically, this checkbox would be checked.
Alarm voice output If this checkbox is selected, predefined sound (.WAV) files can be
played at the alarm console for specific alarm types. Typically, this
checkbox would not be selected.
Show personal data If this checkbox is selected, personal height, build, hair and eye
color data will be displayed on the alarm screen.
No receiver icons If this checkbox is selected, individual SE receiver icons will not be
shown on the alarm map display. Typically, this checkbox would be
selected.