manualshive.com logo in svg

Bosch SE3000 Series, Техническое справочное руководство

Поделиться
Скачать
Bosch SE3000 Series Скачать руководство пользователя страница 83

Security Escort

Configuring equipment using Utility tool | en

83

Robert Bosch (SEA) Pte Ltd

Technical Reference Manual

2018.03 | SE3v1.0 | DOC

Element

Usage/Description

MAC Address

MAC address of the SE coordinator. This information cannot be
changed by the user.

Version

Firmware version of the SE coordinator.

Serial Number

Serial number of the SE coordinator.

Description

Description of the SE coordinator. Maximum length is 20 characters.

IP Address

IP address of the SE coordinator. A factory configured SE coordinator
has the default IP address of 192.168.1.100. Valid IP addresses are
from 1.0.0.0 to 255.255.255.255.

Subnet Mask

Subnet mask of the SE coordinator. A factory configured SE
coordinator has the default subnet mask of 255.255.0.0. Valid subnet
masks are from 1.0.0.0 to 255.255.255.255.

Gateway

Gateway of the SE coordinator. A factory configured SE coordinator
has the default gateway of 192.168.1.1. Valid gateways are from
1.0.0.0 to 255.255.255.255.

Port

TCP/IP port of the SE coordinator. A factory configured SE
coordinator has the default port of 20000. Valid ports are from 00001
to 65536.

Receivers

Click the 

[Scan]

 button to scan the SE receivers of the SE

coordinator.

Transmitters

Click the 

[Scan]

 button to scan the SE transmitters of the SE

coordinator.

[Save] / [Edit]

Click the 

[Edit]

 button to change the information of the SE

coordinator. The 

[Edit]

 button changes to 

[Save]

 button. After making

the necessary changes, click the 

[Save]

 button to affect the changes.

The 

[Save]

 button changes to 

[Edit]

 button.

Status

Status of the SE coordinator. “OK” is displayed when communication
between the 

Utility tool

 and SE coordinator is fine. “FAIL” is

displayed if there are communication issues.

8.1.2

Modifying SE coordinator network settings

Follow the instructions below to change the network information of the SE coordinator. You
can only change the data of one SE coordinator at any one time.

1.

Click the 

[Edit]

 button under the 

Save/Edit

 column for the SE coordinator row entry that

you wish to change. The 

[Edit]

 button changes to the 

[Save]

 button. Click once on the

data that you wish to change. The field becomes enabled for data entry.

Содержание SE3000 Series

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды