Bosch SE3000 Series Скачать руководство пользователя страница 190

Страница: 190 / 256

190

en | System menus and dialogs

Security Escort

2018.03 | SE3v1.0 | DOC

Technical Reference Manual

Robert Bosch (SEA) Pte Ltd

Element

Usage/Description

[Tamper Map]

Requests a map of all the points that are currently reporting a
tamper condition to the system. The

[Tamper Map]

button displays

a map with “1” in the locations corresponding to points that are
reporting tamper. A “0” (zero) indicates points that are not
tampered.

[Output 1]

Requests a map of all the

Output 1

of SE receivers that are turned

on for this SE coordinator. The

[Output 1]

button displays a map

with “1” in the locations corresponding to points that are turned
on.

[Output 2]

Requests a map of all the

Output 2

of SE receivers that are turned

on for this SE coordinator. The

[Output 2]

button displays a map

with “1” in the locations corresponding to points that are turned
on.

[Horn

Siren Map]

Requests a map of all the points that have their horn or sirens on,
on this SE coordinator. The

[Horn

Sirens Map]

button displays a

map with “1” in the locations corresponding to points which have
their outputs on. A “0” (zero) indicates that the output is off.

[Green LED Map]

Requests a map of all the points on this SE coordinator that have
their spare outputs - green LED on. The

[Green LED Map]

button

displays a map with “1” in the locations corresponding to points
which have their outputs on. A “0” (zero) indicates that the output
is off.

[Strobe

Red LED

Map]

Requests a map of all the points on this SE coordinator that have
their strobe - red LED on. The

[Strobe - Red LED Map]

button

displays a map with “1” in the locations corresponding to points
which have their outputs on. A “0” (zero) indicates that the output
is off.

[Input 1]

Requests a map of all the

Input 1

of SE receivers that are currently

monitored for the SE coordinator. The

[Input 1]

button displays a

map with “1” in the locations corresponding to inputs that are
triggered.

[Input 2]

Requests a map of all the

Input 2

of SE receivers that are currently

monitored for the SE coordinator. The

[Input 2]

button displays a

map with “1” in the locations corresponding to inputs that are
triggered.

[Out Of Service Map]

The

Out Of Service Map

shows those SE receivers that are

currently out of service. Se receivers may be taken out of service
and returned to service by selecting the point using

MUX Bus

Point

dialog in the bottom right corner of the screen and clicking

the

[Point Out Of Service]

[Point In Service]

button. Points can

be selected by typing in the point number or by using the

[+]

and

[-]

buttons, or the

[?]

button.

Others

Содержание SE3000 Series

































































































































































































































































Результаты поиска

Содержание SE3000 Series

Отзывы:

Бренды по названию

Популярные бренды

Bosch SE3000 Series, Техническое справочное руководство

Результаты поиска

Содержание SE3000 Series

Отзывы:

Бренды по названию

Популярные бренды