manualshive.com logo in svg

Bosch FPD-7024, Руководство по эксплуатации и установке, Страница: 14 / 102

Поделиться
Скачать
Bosch FPD-7024 Скачать руководство пользователя страница 14

FPD-7024 

|

 

Operation and Installation Guide | 1.0 

Overview 

 

 

14 

Bosch Security Systems, Inc. | 1/10 | F01U008458-03 

 

1.2.12 Compatible Devices 

Table 8: 

Compatible Devices 

 

Device Function 
D7030 Eight Point LED 
Annunciator 

Identifies the location of a fire alarm for up to eight zones allowed per system. 

D7030X Eight Point LED 
Annunciator 

Identifies the location of a fire alarm for up to eight zones allowed per system. 

D7030X-S2 Eight Point 
LED Annunciator 

An eight-zone LED annunciator, of which two zones are reserved for supervisory functions. 
It has Power and Trouble LEDs plus eight-zone LEDs that can be labeled individually. 

D7030X-S8 Eight Point 
LED Annunciator 

An eight-zone LED annunciator, of which all eight zones are reserved for supervisory 
functions. It has Power and Trouble LEDs plus eight-zone LEDs that can be labeled 
individually. 

D7032 Eight Point LED 
Annunciator Expander 

Attaches to a D7030X and identifies the location of a fire alarm for eight additional zones. 

FMR-7033 Alphanumeric 
LCD Keypad 

Connects up to four-keypads per system. 

FPC-7034 Four Point 
Expander 

Allows the FPD-7024 Control Panel to support four additional points. The FPC-7034 plugs 
into the control panel and provides four Class B, Style 4 loops that are identical in 
characteristics to the loops on the control panel. One FPC-7034 is allowed per system. 

D7035/B Octal Relay 
Module 

Provides eight Form C relay outputs for addition to the system. The outputs are 
programmable and can be activated by system events. Each output operates independently 
of the other seven outputs for complete flexibility. The D7035 connects to the option bus; up 
to two are allowed per system. Refer to the 

D7035 Installation Guide

 (P/N: 37280) for 

required enclosure modification. The D7035B comes installed on a mounting skirt. 

FMR-7036 Fire 
Annunciator Keypad 

Establishes the location of a fire alarm. 

FPP-RNAC-8A-4C 
Remote NAC Power 
Supply 

Adds four NFPA 72 Class B, Style Y Notification Appliance Circuits through the option bus 
and is supervised by the control panel. The FPP-RNAC-8A-4C connects to the option bus of 
the FPD-7024 control panel and up to four are allowed per system. 

D7039 Multiplex 
Expansion Module 

Provides either 2 two-wire (Class B, Style 4) multiplex buses or 1 four-wire (Class A, Style 6) 
multiplex bus. In Class A mode, up to 120 addressable points can be added. In Class B 
Mode, up to 247 addressable points can be added. The D7039 connects directly to the 
control panel. One is allowed per system. 

D7042/B Eight-Input 
Remote Module 

Provides eight Class B, Style 4 input points. Connect up to 15 modules to MUX Bus A, and 
15 on MUX Bus B. The D7042 is powered by 12 VDC supplied by the option bus power 
terminals, in addition to the two-wire data connection. The D7042 can not be used on a 
signal line circuit (SLC) configured for Class A, Style 6 operation. 

D7048/B Octal Driver 
Module 

Provides eight open collector transistor outputs for addition to the FPD-7024 Fire Alarm 
Control panels. It connects to the control panels through the option bus. 

FMM-7045 Mux Pull 
Station 

UL Listed fire alarm initiating device. 

D7044 Mux Single Input 
Fire 

Connects a contact device to the multiplex bus of the FPD-7024 with a supervised local 
loop. The D7044 draws operating power from the FPD-7024. 

D7044M Mux Mini 
Contact Module 

Connects a contact device to the multiplex bus of the FPD-7024 with a supervised input 
loop. The D7044 draws operating power from the FPD-7024. 

 

Содержание FPD-7024







































































































Отзывы:

Нет отзывов