Bosch DSA E Series, Руководство по установке

Страница: 37 / 150

E2600 DSA E-Series iSCSI Disk Arrays Connecting the E2600 Controller-Drive Tray to the Hosts | en 37
Bosch Security Systems Installation Manual - | V2 | 2012.09
6. Affix a label to each end of the cable with this information. A label is very important if you
need to disconnect cables to service a controller. Include this information on the labels:
– The host name and the HBA port (for direct topology)
– The switch name and the port (for fabric topology)
– The controller ID (for example, controller A)
– The host channel ID (for example, host channel 1)
Example label abbreviation
– Assume that a cable is connected between port 1 in HBA 1 of a host named
Engineering and host channel 1 of controller A. A label abbreviation could be as
follows.
7. Repeat step 3 through step 6 for each controller and host channel that you intend to use.
6.4 Example cabling patterns
6.4.1 Direct Topology – One Host Connected to a SingleController
Figure 6.2 Direct Topology – One Host Connected to a SingleController
1 Host
2 HBA 1 or NIC 1
3 HBA 2 or NIC 2
4 Host Port 1
5 Host Port 2
6 Controller A