Bosch DSA E Series, Руководство по установке

Страница: 143 / 150

E2600 DSA E-Series iSCSI Disk Arrays Upgrading Memory in the E2600 Controller Canisters | en 143
Bosch Security Systems Installation Manual - | V2 | 2012.09
Figure 19.5 Cache Memory DIMM Slot – Top View
2. Remove the cache memory DIMM from the slot on the controller card ( Figure 19.6 ).
– Pull back on each ejector handle to disengage the cache memory DIMM pins from
the slot on the controller card.
– Lift the cache memory DIMM out of the slot.
– Place the cache memory DIMM that you removed on a flat, static-free surface.
Figure 19.6 Removing a Cache Memory DIMM
3. Install the new cache memory DIMM.
– Align the new cache memory DIMM in the slot.
– Gently push down on the cache memory DIMM to seat the pins into the slot.
The ejector handles rise up as the cache memory DIMM is inserted into the slot.
When these ejector handles are in the vertical position, the cache memory DIMM is
fully engaged and is locked in place.
4. Repeat this procedure for the other controller canister.
5. Go to Section 19.3 Upgrading the Cache Backup Memory Device, page 144 .
1 Cache Memory DIMM Slot
1 Cache Memory DIMM
2 Ejector Handles