Bosch DSA E Series, Руководство по установке

Страница: 77 / 150

E2600 DSA E-Series iSCSI Disk Arrays Turning on the Power and Checking for Problems | en 77
Bosch Security Systems Installation Manual - | V2 | 2012.09
11 ESM Power LED
12 Seven-Segment Tray ID
Table 11.11 LEDs on the ESM Canister
Location LED Color On Off
1 Host Link 1 Fault Amber At least one PHY of the
four connectors is
working, but another PHY
cannot establish the same
link to the device
connected to the Host IN
port connector.
No link error has
occurred.
2 Host Link 1
Active
Green At least one of the four
PHYs in the In port is
working, and a link exists
to the device connected
to the Host In connector.
A link error has occurred.
3 Host Link 2 Fault Amber At least one PHY of the
four connections is
working, but another PHY
cannot establish the same
link to the device
connected to the Host In
port connector.
No link error has
occurred.
4 Host Link 2
Active
Green At least one of the four
PHYs in the IN port is
working, and a link exists
to the device connected
to the Host In connector.
A link error has occurred.
5 Ethernet Link
Active
Green The link is up. (The LED
blinks when there is
activity.)
The link is not active.
6 Ethernet Link
Rate
Green There is a 100BASE-T
rate.
There is a 10BASE-T rate.
7 ESM Expansion
Link Fault
Amber At least one of the four
PHYs in the Out port is
working, but another PHY
cannot establish the same
link to the Expansion Out
connector.
Normal status.
8 ESM Expansion
Link Active
Green At least one of the four
PHYs in the Out port is
working, and a link exists
to the device connected
to the Expansion Out
connector.
A link error has occurred.