Boge airtelligence provis 3 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 88

background image

BOGE compressor control airtelligence provis 3

Page 7

Safety

2.3

Owner and personnel

In addition, the specified minimum qualities of the network cables (CAT 6)
must be observed.

Change of settings

The control regulates the individual compressed airnets by means of settings
or parameters that can be defined individually. These adjustable values can
therefore be used to change the control behavior of the compressors so that
each net produces compressed air on demand. However, incorrect settings
may also cause faults in the operating process or destruction of components.

– The change of settings / parameters may only be carried out by authorized

specialist personnel with sound knowledge of compressed air technology.

– In cases of doubt please contact BOGE service prior to changing any set-

tings.

Data backup

The control is equipped with a Solid State Drive (SSD). All changes made to
adjustable values are automatically stored in this internal memory after being
entered.

To ensure that an originally existing configuration is not lost after a possible
defect of the SSD memory or a change of the settings, it can be transferred to
an external memory for backup using the "Export configuration file" function
(see „Configuration import and export“, page 65).

2.3 Owner and personnel

Personnel requirements

Basically only those persons may carry out activities on the control who per-
form their tasks duly and reliably and meet the following requirements:

Trained personnel

Trained personnel are persons who have been instructed in a verifiable and
detailed manner by the owner about their assigned tasks and any potential
risks in this conjunction.

Qualified personnel

Qualified personnel are persons who, due to their professional training, knowl-
edge and experience as well as their awareness of the relevant regulations,
are in a position to carry out the tasks assigned to them and be able to auton-
omously identify any potential hazards and to prevent personal injury or prop-
erty damage.

Qualified electricians

Qualified electricians are persons who, due to their professional training,
knowledge and experience as well as their awareness of the relevant stan-
dards and regulations, are in a position to properly carry out work on electrical
installations, to autonomously identify any potential hazards and to prevent
personal injury or property damage caused by electric current.

Prior to describing any work that requires special knowledge, it is clearly
indicated in these operating instructions what qualifications profile a person
must comply with to perform the described tasks.

«
...
13
14
15
16
17
...
»

Содержание airtelligence provis 3

























































































Отзывы:

Нет отзывов

Похожие инструкции для airtelligence provis 3

Бренд: UE Страницы: 4

Бренд: Walchem Страницы: 10

Бренд: Tapeswitch Страницы: 13

Бренд: Value Point Страницы: 7

Бренд: Bartec Страницы: 26

Бренд: V2 Страницы: 48

Бренд: Data I/O Страницы: 88

Бренд: Data Aire Страницы: 13

Бренд: Gardena Страницы: 14

Бренд: Gardena Страницы: 8

Бренд: Rabbit Страницы: 38

Бренд: Tamas Страницы: 12

Бренд: Taoglas Страницы: 2

Бренд: U-Prox Страницы: 3

Бренд: U-Prox Страницы: 2

Бренд: Koer Страницы: 6

Бренд: EVERSPRING Страницы: 3

Бренд: elsner elektronik Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды