BOGE compressor control airtelligence provis 3
Page 1
General
1.1
Who are these operating instructions intended for?
Part 1: General
1.1 Who are these operating instructions intended
for?
These operating instructions are aimed at BOGE end customers who want to
control the compressed air production of several compressors, organized in
one or several compressed airnets, by means of the master compressor con-
trol
airtelligence provis 3
.
Apart from reading these operating instructions, the following prerequisites
and previous technical knowledge on the part of the user are essential for the
correct operation of the control:
– comprehensive technical knowledge of the connected compressors
– knowledge of the operating instructions of these compressors
– classification as qualified or appropriately trained personnel with technical
background knowledge in compressed air technology (see also
„Personnel requirements“, page 7)
1.2 Contents of these operating instructions
The operating instructions exclusively deal with installation, functioning, oper-
ation and setting of the
airtelligence provis 3
.
The following contents and descriptions of activities do not form part of these
operating instructions:
– all safety-relevant information as to the individual compressors, they form
part of the compressor operating instructions.
– any information as to controls which are directly installed on the individually
connected compressors (slave controls).
– any work, e.g. repairs on the control or installation of updates.
– any work on compressors and equipment (e.g. installation, commissioning
or service).
– description of the complete set-up/installation of compressed airnets or
individual compressors within the master control (specially trained BOGE
service personnel only).
Any of the above mentioned work may
only
be carried out by authorized and
qualified personnel, qualified electricians or BOGE service personnel.
BOGE recommends to have control(s), compressors and equipment set up
and commissioned by BOGE service personnel. Make sure that any servicing
or repair work on the control is also performed by BOGE service personnel.
If you have any questions as to the product, please contact the Technical
Support by calling:
Phone: +49 5206 601-140
If you require service personnel, please contact BOGE Service by calling:
Phone: +49 5206 601-100
