36
STEPS 4 THROUGH 15 ARE FOR ETHERNET OR WI-FI CONNECTION ONLY
4. The self-test ticket that is printed when the
printer’s TEST button pressed will show the IP address that the
printer has.
5.
Open up the “Devices and Printer” Menu.
6.
Click on “Add a Printer”. When Add Printer Wizard show up, click on the Next button. Click on “Add a local
printer
”.
7. Whe
n the printer port menu comes up. Click on “Create a new port:” choose “Standard TCP/IP Port”.
Click on the Next button.
8. Type in the IP address that is shown on the self-
test ticket in the “Hostname or IP address:” field. When
typing in the address
don’t include the leading zeroes (If IP=189.010.000.002 then type in 189.10.0.2).
You also have the option of typing in a specific Port name or leave as the IP address. Click on the Next
button.
The below screen may be seen (no action is needed). It may take a few minutes for the system to move on to the next
screen. This will vary depending on system and Network speeds.
