16
9.2 Burster Assembly
The burster assembly is a fully integrated burster blade mechanism powered by a solenoid. The
burster requires no adjustments and is rated for approximately 400,000 bursts.
Inspect the burster blade once a year and clean if a buildup of material is seen on the blade.
Material buildup will mostly be found on the backside of the blade that faces where the tickets are
loaded into the printer. Using a 6
” cotton tipped applicator and isopropyl alcohol, gently clean the
burster blade.
On a new model Lemur-M printer you will need to remove the three
¼” nut Philip head that hold the
burster stiffener plate in place. You will have accesses to the burst blade once the plate is removed.
Burster Blade
