28
APPENDIX A - CONTROL PANEL
The FGL46 printers allow the user to adjust various printer options through the optional control panel. To access the
control panel menu, press both
MENU
and
TEST
switches simultaneously for about 3 seconds. The LCD will display the
“OPERATOR MENU!”
message to indicate that it has entered the control panel menu mode. Once in this mode, please
use the following steps in the manner indicated to choose the proper menu topic and to select the proper setting.
To access and use the OPERATOR MENU, follow these steps:
1.
Ticket stock should be loaded into the printer. The LCD window displays
FGL46G# - SB#
(# - number value
depends on revision level; G represents the software series level; B# is the font)
2.
Press both
MENU
and
TEST
switches simultaneously for about 3 seconds. The LCD window displays
OPERATOR
MENU. (
To access the factory menu, press
MENU and CHOICES
instead of
MENU
and
TEST
.)
WARNING:
Improper use of the factory menu may disable your printer.
3.
To scroll through the menu topic, use
MENU
stopping on the topic you wish to change.
4.
Press
CHOICES
to scroll through choices in the selected topic.
NOTE:
The printer displays a blinking cursor for the
values presently stored in the printer.
5.
Once you have found the new value you want, press
TEST
. The LCD window displays
EXIT AND
SAVE?
If you wish
to save the new value then press
TEST
again.
6.
If you do not wish to save the new value then press
MENU
. The LCD window displays
JUST EXIT?
Press
TEST
to exit the
OPERATOR MENU
without saving new values or press
MENU
to enter back into the
OPERATOR
MENU
.
The chart below lists the present menu topics. These topics are subject to change.
OPERATOR MENU
BAUD RATE?
PRINT SPEED?
DIAGNOSTIC MODE?
STATUS ENABLED?
PAPER MODE?
SPECIAL HEAD
CLEAR DOWNLOAD
PRINT INTENSITY?
TEST TICKET?
TICKET LENGTH?
INC BURST COUNT?
DEC BURST COUNT?
ETHERNET?
IP ADDRESS?
SUBNET MASK?
DEFAULT GATEWAY?
DNS SERVER?
SPEED/DUPLEX?
DEFAULT WEBPAGE?
REFRESH RATE?
TICKET REMAIN 1
TICKETS LOW1?
TICKET REMAIN 2
TICKETS LOW2?
EXIT AND SAVE?
JUST EXIT
Selects proper menu topic
(baud rate, cut count, etc.)
Scrolls through choices in
individual menu topics
Enters new value. Also
saves new values
