Blue Seal 203926, Руководство по обслуживанию

Страница: 38 / 76

-38-
Revision 7/F3527
© Moffat Ltd, November 2004
Two
Screws
Two Screws
6.3.23 OUTER GLASS
1) Open door
2) Loosen the two screws securing the top
pivot whilst supporting the door. The pivot
can now be lifted, and the door removed
from the oven.
3) Remove screws securing door handle,
and remove handle from the door
assembly.
Figure 6.3.33
Figure 6.3.34
4) Remove four screws in top trim and four
screws in bottom trim of door, and remove
trim panels.
Screws
5) Remove the two screws securing the gas
valve mounting bracket to the burner box
panels.
6) Disconnect the three leads from the gas
control valve.
7) Remove the gas valve and connected
piping by drawing out through the side
service panel.
8) Replace and reassemble in reverse order.
Figure 6.3.29
Figure 6.3.30
Control
Valve
Leads
(240V)
Figure 6.3.31
Control
Valve
Leads
(110V)
6.3.22 BURNER
Burner
Injector
Figure 6.3.32
1) Remove burner access panel (refer 6.2.4).
2) Remove ignition electrode assembly (refer
6.3.17)
3) Remove injector (refer 6.3.21).
4) Burner can now be withdrawn from the
oven. Inspect / replace and re-assemble
in reverse order.
6.3.21 BURNER INJECTOR
1) Remove burner access panel (refer 6.2.4).
2) Remove injector from burner throat
(13mm / ½” spanner).
3) Clean or replace injector as required.
Re-assemble in reverse order.