Blue Seal 203926, Руководство по обслуживанию

Страница: 15 / 76

-15-
Revision 7/F3527
© Moffat Ltd, November 2004
IMPORTANT: THIS UNIT IS NOT
WATER PROOF.
DO NOT USE A WATER JET SPRAY TO
CLEAN INTERIOR OR EXTERIOR OF
THIS UNIT.
WARNING: ALWAYS TURN THE
POWER SUPPLY OFF BEFORE
CLEANING.
EXTERIOR
Clean with a good quality stainless steel
cleaning compound. Harsh abrasive cleaners
may damage the surface.
Do not use oven cleaners or caustic solutions
to clean the control panel as these cleaners
will damage plastic components.
INTERIOR
Ensure that the oven chamber is cool. Do not
use wire brushes, steel wool or other abrasive
materials. Clean the oven regularly with a
good quality oven cleaner. Take care not to
damage the fan or the tube at the right side of
the oven which controls the thermostat.
OVEN RACKS
To remove, slide out to the stop position, raise
the front edge up, and lift out.
SIDE RACKS
To remove, lift front top to disengage and
slide rack forward. To replace, slide top rear
slot in rack onto rear stud, then engage front
keyhole on front stud.
OVEN BASE TRAY
Remove when cleaning oven, and to allow
easier cleaning of enamelled base tray.
Ensure tray is refitted before use.
4. MAINTENANCE
LAMP GLASS
To remove glasses, unscrew anti-clockwise.
To replace, screw in clockwise.
OVEN SEALS
To remove, hold at their centre point and
pull forward until they unclip. Remove side
seals first, then top and bottom. The seals
may be washed in the sink, but take care not
to cut or damage them. To replace, ensure
that the lip is facing the oven opening. Fit
the top and bottom seals first, then the side
seals.
OVEN DOOR GLASS
Clean with conventional glass cleaners.
IMPORTANT: DO NOT OVER
TIGHTEN LAMP GLASS.
NEVER OPERATE OVEN WITH LAMP
GLASSES REMOVED
4.1 CLEANING
WARNING: ALL INSTALLATION AND SERVICE REPAIR WORK MUST BE CARRIED
OUT BY QUALIFIED PERSONS ONLY.