Blue Seal 203926, Руководство по обслуживанию

Страница: 18 / 76

-18-
Revision 7/F3527
© Moffat Ltd, November 2004
FAULT POSSIBLE CAUSE REMEDY
BURNER INCORRECT
COLOUR
(Refer installation section—
Gas Connection and
Adjustment for correct
colour)
Incorrect gas type.
Incorrect burner orifice size
fitted.
Incorrect burner pressure
setting.
Obstructed burner injector.
Burner obstructed.
Oven flue obstructed.
Oven fan obstructed.
Injector out of alignment. Check appliance gas type.
(Refer installation section)
Ensure orifice is correct.
(Refer specification section)
Check gas pressure.
(Refer installation section—
Gas Connection and
Adjustment)
Check injector.
(Refer service section 6.3.21)
Remove burner and inspect for
obstructions.
(Refer service section 6.3.22)
Check for obstructions.
Check for obstructions.
Check injector alignment.
(Refer service section 6.4.9)
BURNER NOISY
(BURNER BLOWBACK /
BURNER BACKFIRE) Oven not installed with correct
legs / feet fitted.
(Not applicable to units on
stands)
Installation clearances not
correct.
Gas leak.
Flue obstruction.
Oven fan not operating.
(Refer Fault: Fan doesn’t
operate)
Burner obstruction.
Burner faulty.
(Refer fault diagnosis 6.1.3)
Fit correct legs/feet
(Refer installation section)
Ensure correct installation
clearances.
(Refer installation section)
Leak test and repair.
Ensure oven flue/vent on top of
oven is not obstructed.
Ensure oven flue/vent not
blocked on inside of oven.
Remove burner and inspect for
obstruction.
(Refer service section 6.3.22)
Replace.
(Refer service section 6.3.22)