Blue Seal 203926, Руководство по обслуживанию

Страница: 34 / 76

-34-
Revision 7/F3527
© Moffat Ltd, November 2004
Two Screws
6.3.8 ROAST TIMER
1) Remove roast timer knob by pulling it
firmly away from control panel.
2) Open control panel (refer 6.2.1) and undo
two screws securing timer.
6.3.9 THERMOSTAT
1) Pull knob off front of thermostat
2) Open control panel (refer 6.2.1) and undo
two screws securing thermostat.
3) Transfer wires to new timer.
4) Withdraw old timer and insert new timer,
securing with screws.
5) Replace knob.
3) Transfer wires to new timer.
4) Withdraw old timer and insert new timer,
securing with screws.
5) Replace knob.
Two Screws
3) Transfer wires to new thermostat.
4) Open oven door, remove racks and fan
baffle rack. Loosen two screws securing
thermostat phial bracket.
5) Withdraw old thermostat phial through
side of oven. Note position in phial
bracket.
6) Remove fibreglass sleeving from old
thermostat and fit to replacement
thermostat.
7) Insert new thermostat.
8) Re-assemble in reverse order.
NOTE: Ensure that the thermostat phials are
located in their correct positions. The
main thermostat probe must be on the
side closest to the door. The hold
thermostat must be on the side closest to
the fan.
Figure 6.3.9
Figure 6.3.10
Fibreglass Sleeve
Thermostat Phial
Figure 6.3.11
Figure 6.3.12
Two Screws
Control thermostat
phial
Hold thermostat
phial
Towards
the
door
Figure 6.3.13