Blonder tongue AMM-806, Справочное руководство, Страница: 73 / 285

66
MegaPort Manager - Tips
By clicking on the column header of the detail pane, the user can
sort in ascending or descending order.
To add remove columns, you can either right-click the columns
header or click on the ‘View’ menu, and then choose ‘Customize
Current View…’.
To change column order, you can either use ‘drag and drop’ and
move the header left/right, or use the form opened by ‘Customize
Current View…’, mark the field you want to change, and press
‘Move Up’ or ‘Move Down’.
If the message box ‘Request Timed Out’
appears often, it could mean that the
SNMP Session parameters ‘Time Out’
or ‘No. of Retries’ are too low.
You can change this in the ‘Application Setting’ form, which can
be opened from the View-> Settings menu or using Ctrl + T.
F5 and the ‘Refresh’ toolbar button don’t refresh all data
presented in the main window. They refresh only data that are
likely to change, such as counters. To make a full refresh, you
must click on the ‘View’ menu, and choose ‘Refresh All’.
If some IOs or Users were deleted by someone else after you
connected to a specific MPG the application will not update these
changes even if a full refresh is done. You have to disconnect
from the MPG, and then reconnect to it, and then the new
configuration window will be updated.