8
i)
It is advisable to stock all spare parts and wear parts that cannot be supplied quickly. As a rule,
production standstill periods are more expensive than the cost for the corresponding spare part.
j)
The suitable precautions include decontamination before disassembling the machine, adequate filtered
ventilation of the exhaust air from the room in which it is disassembled, cleaning of the maintenance area
and suitable personal protection equipment.
3.7
Dust collector safety by the machine
a)
Always use an appropriate Blastrac dust collector to ensure a dust-free operation of the machine and
clean air at the workspace. Also the airflow helps to cool the machine and prevents overheating.
b)
Read the operating instructions of the dust collector before using it.
c)
The dust container/bag of the dust collector must be emptied regularly. Comply with the local waste
treatment regulations considering the removed material.
d)
The dust hose must be connected properly with a hose clamp and industrial tape.
e)
The dust hose must be undamaged and free of obstructions.
f)
Always switch on the dust collector first!
3.8
Transport safety
a)
Be aware of your surroundings and machine operating level.
b)
The weight of the 200-VMB is 177 kg (without shot, hoses etc.)
When transporting the machine with a
crane or lift, use the spreader beam of the machine.
c)
Before every use check the lifting eyes, turnbuckles, spreader beam and welds for:
deformation, damages, cracks, corrosion and wear.
d)
Each lifting lug has a WLL of 500kg.
e)
When lifting the machine from the ground, always use the lowest lifting speed. The cable or chain must
first be tensioned at this speed; it must not be slack when the machine is lifted from the ground.
f)
During hoisting make sure to be at a safe distance from the machine with the most optimal view on the
machine and working environment.
g)
Never stand directly below the machine.
h)
When transporting the machine do so in such a manner that damage due to the effects of the use of force
or incorrect loading and unloading is avoided.
i)
Fasten the machine on a pallet or during transport.
j)
Don’t leave the machine unsecured on jobsites.
k)
Park the machine always on a flat horizontal and levelled surface.
l)
Remove the abrasive from the machine before transport.
m)
Make sure the electrical cable and dust hose are disconnected before transport.
n)
Store the cleaned and dry machine in a humid free room. Protect the electrical motor from moisture, heat
dust and shocks.
o)
Never use the machine for lifting persons or items.
p)
Only lift the machine as shown in the picture below.
Содержание 200VMB
Страница 1: ...Original instructions in English OPERATING INSTRUCTIONS 200VMB VERSION 1 2...
Страница 22: ...22 2 Use a brass drift to tap out the side liners...
Страница 23: ...23...
