Blastrac 200VMB, Руководство по эксплуатации

Страница: 17 / 35

17
Prior to any repair works on the machine and its drives, secure the machine against unintentional
switching on. Put the machine to its safety off position.
The machine is in a safe condition when it cannot generate any hazard.
Follow additional operating and maintenance instructions of Original
Equipment Manufacturers if included during your service and
maintenance work.
Further is advised:
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motors from moisture,
heat, dust and shocks. Remove the abrasive out of the abrasive storage hopper.
All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine.
Any guarantee on the machine is expired when:

Non original Blastrac parts have been used

Repair work is not done by qualified Blastrac personnel

Changes, add on’s or conversions are undertaken without written permission of Blastrac B V
Screws, bolts etc. that have been removed must be replaced with those of the same quality, strength, material
and design.
Do not weld, flame cut or perform grinding works on or near the machine. Danger of fire or explosion exists!
Provide adequate ventilation when working in a confided space.
Secure the maintenance area if necessary.
Clean the machine every day with air and non-aggressive materials. Never use a high pressure water cleaner
to clean the machine.
Consult the Service Manual for spare parts and additional drawings.