Blastrac 200VMB, Руководство по эксплуатации

Страница: 32 / 35

32
8. Selection of abrasive
The Blastrac blast cleaning machines are designed and built to operate with Blastrac abrasive .
Blastrac abrasive has a very high quality and has the rebouncing ability required for the efficient use of the
machine. The selection of abrasive is very important since this is the material to carry out the surface
treatment.
Abrasive shot S330 – S390 – S460:
Applications:
Removes coatings with a thickness of 1-3-mm and cleaning of steel surfaces.
Abrasive shot S330 – S390 – S460
The type of abrasive (mix) is depending on the profile requirements.
Applications:
- Removes polyurethane coatings
- Removes adhesive remnants
- Removes rubber deposits
- Penetrates coatings hard to remove
Please take into account that the use of incorrect abrasive increases wear.
Our service engineers have the experience to select the appropriate abrasive for the
individual cases of application.
Please consult your local
Blastrac customer service department if you have any
questions about the selection of the best abrasive for your blast cleaning work.