Blastrac 200VMB, Руководство по эксплуатации

Страница: 3 / 35

3
Table of contents
1. Introduction 4
2. Machine description 4
3. Safety 5
3.1 Work area safety 5
3.2 Electrical safety 5
3.3 Personal safety 6
3.4 Machine safety 6
3.5 Shot / steel blasting safety 7
3.6 Maintenance safety 7
3.7 Dust collector safety 8
3.8 Transport safety 8
3.9 Markings on the machine & EU Declaration 9
4. Before operation 10
4.1 Daily check points of power supply 10
4.2 Daily check points of machine 10
4.3 Check points on the hoisting and lifting equipment 10
5. Operating 11
5.1 Before switch on 11
5.2 Adjusting the spreader beam, turnbuckles
and swivel castors
12
5.3 Switch on the machine 13
5.4 Switch off the machine 13
5.5 Operation 14
5.6 The blast pattern 14
6. Maintenance 16
6.1 Changing the mouth seal complete 18
6.2 Changing the blastwheel 19
6.3 Removing the liners 21
6.4 Abrasive valve maintenance 50 hours 23
6.5 Abrasive valve maintenance 250 hours 24
6.6 The V-belt 25
6.7 V-belt mounting 25
6.8 V-belt tension 25
6.9 Safety check by a competent person 25
6.10 Ammeter digital display 26
7. Troubleshooting 29
8. Selection of abrasive 31
9. Technical data 32
Contact