Black Box MT1000A-13-R3, Быстрый старт

Страница: 34 / 78

Chapter 4 Configuration MT1000A Installation and Operation Manual
4-6 Monitoring the System
Table 4-1. Local System Status Values
Field Description
SW Version Version number of the installed software.
HW Version Hardware version number.
BOOT Version The software boot version and the boot manager version installed on
the device.
Active link Identifies the currently active link.
Redundancy
status The redundancy state of the system:
•
AUTO
• MANUAL
• OFF.
PS1 Type The type of power supply for Power Supply 1:
•
AC—AC power supply
• 24VDC—DC power supply
• DC-48V—DC power supply
•
NONE—No power supply is installed in this power supply slot.
PS1 Status The status of Power Supply 1:
• OK
• Fault
•
Not mounted.
PS2 Type The type of power supply for Power Supply 2:
•
AC—AC power supply
• 24VDC—DC power supply
• DC-48V—DC power supply
•
NONE—No power supply is installed in this power supply slot.
PS2 Status The status of Power Supply 2:
• OK
• Fault
•
Not mounted.
MAC Address The address the device holds when transmitting frames via the
Ethernet port.
IP Address on The address used when transmitting IP frames via the Ethernet port.
Sys up time System up time.
Alarm Indication Current system status:
•
Normal—System is functioning normally; no alarms activated
•
Major—One or more major alarms are currently activated
•
Minor—One or more minor alarms are currently activated.
Test Indication Indicates whether any tests are currently active in the device:
•
ON—Tests are currently active in the device
•
OFF—No tests are currently running.