Chapter 4 Configuration
MT1000A
Installation and Operation Manual
4-18
Configuring the MT1000A
Setting up the Manager List
By default, any remote management terminal is allowed to change the
configuration of the MT1000A. You may enhance the security of the site by
limiting remote management to specific management terminals or nodes. The
Manager List lists the network nodes from which management may take place.
To define the manager list:
1. From the Management menu (
Figure 4-23
), choose
Manager List
.
The Manager List screen (
Figure 4-27
) is displayed.
MT1000A
Manager List
mngNum mngIP mngMask
1 0.0.0.0 NO
| 2 0.0.0.0 NO
| 3 0.0.0.0 NO
v 4 0.0.0.0 NO
5 0.0.0.0 NO
1. Change cell ... (0.0.0.0)
>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-27. Manager List Screen
2. The list contains 10 entries. Press
D
to move down the list; press
U
to move up
the list. Press
L
to select the previous field; press
R
to select the next field.
3. To change the value of a field, select the field (it will appear highlighted), then
choose
Change Cell
and then enter the new value.
When the mngMask field is set to
Yes
, a trap is sent to this agent.
Setting the Management Access
To set the management access:
1. From the Management menu (
Figure 4-23
), choose
Manager Access
.
The Manager Access menu (
Figure 4-28
) is displayed.
MT1000A
Manager Access
1. Telnet >
2. SNMP >
3. Web >
4. Web Trace Refresh (seconds)[1-255] ... (10)
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-28. Manager Access Menu
Содержание MT1000A-13-R3
Страница 2: ......
Страница 16: ...Chapter 1 Introduction MT1000A Installation and Operation Manual 1 10 Technical Specifications...
Страница 28: ...Chapter 3 Operation MT1000A Installation and Operation Manual 3 4 Turning MT1000A Off...
Страница 72: ...Appendix B MT1000A MIBs MT1000A Installation and Operation Manual B 2...