Black Box MT1000A-13-R3, Быстрый старт

Страница: 45 / 78

MT1000A Installation and Operation Manual Chapter 4 Configuration
Configuring the MT1000A 4-17
Setting the network parameters
When you integrate the MT1000A into your network, you will need to set the
network parameters of the MT1000A.
To set the network parameters:
1. From the Management menu ( Figure 4-23 ), choose Host IP .
The Host IP menu ( Figure 4-25 ) is displayed.
MT1000A
Host IP
1. Host IP List >
2. Default Gateway ... (172.17.161.1)
3. Read Community ... (public)
4. Write Community ... (public)
5. Trap Community ... (public)
>
Please select item <1 to 5>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-25. Host IP Menu
2. Choose Host IP List .
The Host IP List menu ( Figure 4-26 ) is displayed.
MT1000A
Host IP List
1. IP Address ... (172.17.161.93)
2. IP Mask ... (255.255.255.0)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit
1 user(s)
Figure 4-26. Host IP List Menu
3. To set the IP address of the MT1000A unit, choose IP Address and then enter
the IP address.
4. To set the IP Mask, choose IP Mask and then enter the IP mask.
5. To set the default gateway, from the Host IP menu ( Figure 4-25 ), choose
Default Gateway and then enter the IP address of the gateway.
6. From the Host IP menu, choose Read Community and then set the read
community. This field is used by SNMP. Specify a string of eight characters.
7. From the Host IP menu, choose Write Community and then set the read
community. This field is used by SNMP. Specify a string of eight characters.
8. From the Host IP menu, choose Trap Community and then set the read
community. This field is used by SNMP. Specify a string of eight characters.