Bionet BM1VET, Руководство по эксплуатации

Страница: 18 / 191

BM1VOM-1.24
1.BASIC 17
BM1VET Operation Manual
The Equipment should be placed far from generators, X-ray equipment, broadcasting
equipment or transmitting wires, so as to prevent electrical noises from being generated during
the operation, When these devices are near the Equipment, it can produce inaccurate
measurements. For BM1Vet, both independent circuit and stable grounding are essentially
required. In the event that the same power source is shared with other electronic equipment, it
can also produce inaccurate output.
Warning
Do not have contact with the animal while operating the machine It may cause serious danger
to the users. Use only the provided cable.
Warning
In case the Equipment does not operate as usual or is damaged, do not use on animal, and
contact a medical equipment technician of the hospital or the equipment supply division.
Note
BM1Vet is classified as follows:
- BM1Vet classifies as Class
I, BF &
CF concerning electric shock. It is not proper to operate
this Equipment around combustible anesthetic or dissolvent.
- Noise level is B class regarding IEC/EN 60601-1 and the subject of Nose is B level concerning
IEC/EN60601-1-2.
Equipment Connection
Caution
In the hospital, doctors and animals are exposed to dangerous, uncontrollable compensating
currents. These currents are due to the potential differences between connected equipment.
The safety solution to the problem is accomplished with EN60601-1;1993.
Biocompatibility
When used as intended, the parts of the product described in this operator manual, including
accessories that come in contact with the animal during the intended use, fulfill the biocompatibility
requirements of the applicable standards. If you have questions about this matter, please contact
BIONET or its representatives.
Maintenance and Cleaning