Bionet BM1VET, Руководство по эксплуатации

Страница: 183 / 191

BM1VOM-1.24
Appendix A 182
BM1VET Operation Manual
Appendix A.
Electromagnetic Emissions and Immunity
M
anufacturer’s declaration - electromagnetic emission
The BM1 system is intended for use in the electromagnetic environment specified below. The
customer or the user of BM1 system should assure that it is used in such an environment
Emission test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11 Group 1 The BM1 system uses RF energy only for its
internal function. Therefore. Its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment
RF emissions
CISPR 11 Class B The BM1 system is suitable for use in all
establishments other than domestic and those
directly connected to the public low-voltage
power supplies buildings used for domestic
purposes.
Harmonics emission
IEC 61000-3-2 A
Voltage fluctuation
IEC 61000-3-3 Complies
M
anufacturer’s declaration - electromagnetic immunity
The BM1 system is intended for use in the electromagnetic environment specified below.
The customer or the user of the BM1 system should assure that it is used in such an
environment
Immunity test IEC 60601
Test level Compliance level Electromagnetic
Environment -
guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2 6 kV Contact
8 kV Air 6 kV Contact
8 kV Air Floors should be wood,
concrete or ceramic
tile. If floors are
covered with synthetic
material, the relative
humidity should be at
least 30 %
Electrical fast
Transient / burst
IEC 61000-4-4 2kV for power supply lines
1kV for input/output lines 2kV for power supply lines
1kV for input/output lines Mains power quality
should be that of a
typical commercial or
hospital environment.
Surge
IEC 61000-4-5 1 kV differential mode
2 kV common mode 1 kV differential mode
2 kV common mode Mains power quality
should be that of a
typical commercial or
hospital environment.
Power frequency
(50/60Hz)
Magnetic field
IEC 61000-4-8 3.0 A/m 3.0 A/m Power frequency
magnetic fields should
be at levels
characteristic of a
typical location in a
typical commercial or
hospital environment.