BIO RAD VERSADOC, Руководство пользователя

Страница: 9 / 61

User’s Manual
•
1-3
1.2.3 Power Safety Information
The VersaDoc contains high voltage circuits. The user must disconnect the
power cord prior to opening the rear access panel, or removing the lamp
modules for bulb replacement.
WARNING: It is mandatory for the users to power down the system and
disconnect the AC mains from the unit before performing any disassembly or
repair to the instrument.
The VersaDoc system is designed and certified to meet EN61010 Safety and
EA1 Electromagnetic Compliance requirements, which are
internationally accepted safety standards. Certified products are safe to use
when operated in accordance with the instruction manual. This safety
certification does not extend to uncertified equipment or accessories, even
when connected to the VersaDoc system.
Figure 1.1 shows the serial number certification label, which is found on the
rear panel of the VersaDoc system. This label provides manufacturing data
and safety compliance information about the instrument.
Figure 1.1
For easy customer access the instrument serial number information located at
two places in your system.
1. On the rear of the instrument
2. Inside the main door
1.2.4 UV Safety Information
This instrument uses a powerful source of UV radiation and may cause
damage to unprotected eyes and skin. The VersaDoc provides safety
interlocks on both the main door and the sliding UV transilluminator module
to protect the user from accidental UV exposure. A plastic UV shield is
provided for convenience, however, it may not be adequate to protect you
from accidental UV exposure. You must use additional personal UV
protection like UV protective eyeglasses, gowns, gloves etc.