BIO RAD VERSADOC, Руководство пользователя

Страница: 39 / 61

User's Manual
•
3-25
Figure 3.21. Steps in 50 mm lens installation.
5. The lens in now locked into position and the lens cap and protective platen cover
can be removed.
Lens Removal
To remove the lens from the camera housing follow the procedure outlined below
(Figure 3.22):
1. Place the lens cap on lens
2. Hold the lens firmly with your left hand throughout the remainder or the removal process
so that it cannot be dropped accidentally.
Caution: Accidentally dropping the lens could break the UV
transilluminator platen or white light conversion screen. Replacement
of such a broken platen or white light conversion screen is not covered
by warranty or service contract.
3. Depress the red release button on the base of the camera housing. This is located to
the rear, right-hand side of the lens.
4. Rotate the lens in a clockwise direction (to the right) to release it from the housing.
5. Pull the lens down and remove it from the filter wheel assembly.
6. Replace the mount cover. If the lens is not being used for some time it is recommended
that it be stored in its original packaging.