BIO RAD VERSADOC, Руководство пользователя

Страница: 38 / 61

User's Manual
•
3-24
3. Remove the protective cover from the lens mount (rear of lens) and check that
the lens is clean. If the lens is dirty it should be cleaned with the materials
provided in the lens and filter cleaning kit.
4. Open the door to the main door and position the lens so that the white line on its
mount matches the white mark on the base (right hand side) of the camera
assembly.
5. Insert the mount of the lens into the base of the camera assembly and turn the
lens counter clockwise (to the left) until you hear it click. The white mark and
setting indicators on the lens should now be directly in front of you.
6. The lens in now locked into position and the lens cap and protective platen
cover can be removed.
Figure 3.20. Steps in zoom lens installation.
High Sensitivity 50 mm Lens Installation
To correctly install the 50 mm high NA lens, follow the procedure outlined below
(Figure 3.21):
1. Remove the lens from its packaging and retain the packaging for future storage.
2. Remove the protective cover from the lens mount (rear of lens) and check that the
lens is clean, free of dust, fingerprints and scratches. If the lens is dirty it should be
cleaned with the materials provided in the lens and filter cleaning kit.
3. Open the door to the main door and position the lens so that the white line and dot
on its mount matches the white mark on the base of the camera assembly.
4. Insert the mount of the lens into the base of the camera assembly and turn the lens
clockwise (to the left) until you hear it click. The main white line and lens settings are
directly in front of you.