BIO RAD VERSADOC, Руководство пользователя

Страница: 17 / 61

User's Manual
•
3-3
3.2.1 Unpacking the VersaDoc System Components
With the exception of operating software, VersaDoc components are shipped in pallet-
supported boxes. Unpack the components by following the steps listed below:
1. Cut the two steel straps supporting the main instrument package.
2. Remove the top cardboard lid. Remove other packaging materials and secondary boxes
from the top.
3. Slide the outer sleeve off the box vertically. The VersaDoc enclosure can be found
within the box.
4.
With the assistance of a helper, remove the VersaDoc from the box. Grip the bottom of
the enclosure on both sides (do not lift the instrument by the front door or electronics
area) and place it on the floor for the next step in the setup procedure. When placing
the enclosure allow clear access to the rear panel for connection of the appropriate
cables.
Warning:
Get a helper; a single person should not attempt to lift the VersaDoc.
Warning: To avoid back injury, always bend your knees and keep a straight
back when lifting heavy objects.
Caution:
Do not supply power to the instrument until the VersaDoc system has
been set up using the following installation procedures.
5.
Open all the other boxes and carefully remove all the items.
6. Perform a shipping check to confirm that the system has been supplied complete.
3.2.2 Shipping Check
During the unpacking process inspect all shipping containers to ensure that you have
received all ordered items and that no boxes are damaged. If items are either missing
or damaged, this should be noted at the time of installation so that it can be immediately
reported to both the shipping company and Bio-Rad manufacturing.
The Quantity One acquisition and analysis software is supplied in a separate box.