BinTec X3200, Руководство пользователя

Страница: 72 / 419

72 BinTec Communications AG
Getting Started
3
➤
If X3200 is connected to a main line (e.g. NTBA adaptor), click Express
configuration main line.
➤
If X3200 is connected to a PABX, click Express configuration PBX sys-
tem.
➤
Click Next.
A message appears saying you have configured RVS-COM for operation
with an ISDN adaptor with a CAPI interface.
➤
Click Next.
➤
If a message appears saying you should change the dialing properties (e.g.
area code, exchange number), confirm the message to set your dialing
properties correctly. Adjust the settings (cf.
figure 3-15, page 72 ).
o
Figure 3-15: Dialing properties
The area code must be entered without the "0" prefix.
You only need the exchange number if you are operating X3200 with a PABX.
Normally, the exchange numbers for local and long-distance calls are the same
(see
figure 3-15, page 72 ).