BinTec X3200, Руководство пользователя

Страница: 38 / 419

38 BinTec Communications AG
Getting Started
3
3.2.2 What to Do in Your Windows Network
You have now gathered all the information X3200 needs to know.
To make sure everything works correctly, you also need to check whether your
PC is suitably configured in the network. If not, you will need to make some set-
tings.
In order that the PCs in your network can exchange data, the TCP/IP protocol
must be installed. You should therefore ensure that this protocol is installed on
your PC before beginning configuration.
Checking the TCP/IP Protocol
To check if the TCP/IP protocol is already installed or to install it now, proceed
as follows:
Windows 95/98
➤
Click the Windows Start button and then Settings
➧
Control Panel.
➤
Double click Network.
➤
Look for TCP/IP in the list of network components.
How to use other security mechanisms, e.g. authentication by means of the call-
ing number (CLID) or concealing your own network to the outside (NAT), is ex-
plained in chapter 7, page 259 .
When X3200 is connected to a PABX system for which a "0" prefix is neces-
sary for external line access, this "0" must be considered when entering the
access number.
You only need the network address and netmask of the WAN partner (head
office) if you configure Internet access in addition to a LAN-LAN connection. If
you are not configuring Internet access,
X3200 will be configured so that all
data not destined for your own local network will be forwarded automatically to
the WAN partner (default route).