BinTec X3200, Руководство пользователя

Страница: 224 / 419

224 BinTec Communications AG
Advanced Configuration
6
S
YSTEM
➧
K
EEPALIVE
M
ONITORING
lists all the hosts that are monitored by Kee-
palive Monitoring. The reachability of the hosts is listed under State: alive, if the
host was reachable on the last check, down, if the host was not reachable.
To do Proceed as follows to configure the example shown in figure 6-3, page 221 :
➤
Go to S
YSTEM
➧
K
EEPALIVE
M
ONITORING
.
➤
Press ADD to add the first host that is to be monitored by X3200 with Kee-
palive Monitoring.
➤
Enter Group:
0
.
➤
Enter IPAddress: 192.168.1.10 .
➤
Enter Interval, e.g. 300 .
➤
Select DownAction: down .
➤
Enter FirstIfIndex:
10001
.
➤
Enter Range, 4999 .
➤
Press SAVE.
➤
Press ADD to add the second host.
➤
Enter Group: 0 .
➤
Enter IPAddress:
192.168.1.20
.
➤
Enter Interval, e.g. 300 .
➤
Select DownAction: down .
➤
Enter FirstIfIndex: 10001 .
➤
Enter Range,
4999
.
➤
Press SAVE.
These settings ensure that X3200 checks the reachability of hosts 192.168.1.10
and 192.168.1.20 at intervals of 300 s. If neither of the two hosts is reachable
after three consecutive attempts, all X3200 interfaces for dialup connections to
WAN partners are deactivated. X3200 continues to check the hosts at a time
interval of 300 s and X3200 activates the interfaces again as soon as at least
one host is reachable again.