BinTec X3200, Руководство пользователя

Страница: 213 / 419

X3200 User’s Guide 213
Settings Specific to WAN Partners
6
➤
Enter Primary or Secondary WINS, if applicable.
➤
Press SAVE.
Proceed as follows if you want X3200 to report the DNS or WINS server IP ad-
dresses entered to the WAN partner (Server Mode) or if DNS/WINS addresses
other than those in the LAN are to be used for connections to the WAN partner
(Client Mode, e.g. for dialing into an Internet Service Provider).
➤
Go to WAN P
ARTNER
➧
E
DIT
➧
IP
➧
A
DVANCED
S
ETTINGS
.
➤
Select Dynamic Name Server Negotiation.
➤
Confirm with OK.
➤
Press SAVE.
6.2.9 Routing Information Protocol (RIP)
Routing Routing can be described as follows: The
➤➤
router receives
➤➤
data
packets , each of which contains data about the destination host. On the basis
of the entries in the so-called Routing Table (see chapter 5.2.1, page 131 ), the
router decides which route to use to forward the data packet to ensure that it
arrives at its destination as quickly and cheaply as possible (with the fewest
possible intermediate stations). The entries in the routing table can be defined
statically or the routing table can be updated constantly by a dynamic exchange
If you do not have a Secondary DNS or WINS, you can enter the IP address of
the Primary DNS or WINS in the Secondary Domain Name Server or
Secondary WINS a second time.
This may be necessary for connection to some data communications clients.
If you do not have a Domain Name Server in your LAN (smaller networks often
have no DNS of their own), the name resolution can be carried out, for exam-
ple, via your Internet Service Provider (Client Mode). However, this requires
ISDN connections, which involve charges.
If you work with Windows, you can also obtain name resolution without asking
for a DNS. To do this, you must adapt the LMHOSTS file on all PCs in the LAN.
Detailed information about this is given in
chapter 3.7.2, page 67 .