BinTec X3200, Руководство пользователя

Страница: 319 / 419

X3200 User’s Guide 319
Administration of Configuration Files
8
➤
Leave C
ONFIGURATION
M
ANAGEMENT
with EXIT.
Example You have created the configuration file brick.cf, e.g. with the help of the Confi-
guration Wizard . You have not transferred the file to X3200 over the serial in-
terface; brick.cf can be found in the directory C:\BRICK on your PC. Your PC
has the IP address 192.168.1.1. If you want to transfer brick.cf from your PC to
X3200 , proceed as follows:
➤
For a Windows PC: Click the Windows Start button then Program
➧
BRICKware
➧
DIME Tools to start DIME Tools . The TFTP server must
be active.
➤
Activate a TFTP server under Unix: see the Software Reference.
➤
Go to
C
ONFIGURATION
M
ANAGEMENT
.
TFTP host --> flash
➤
Select Operation: get (TFTP --> FLASH).
➤
Type in TFTP Server IP Address, e.g. 192.168.1.1 .
If error is displayed under State of last operation, check your settings:
■
Have you entered the right IP address under TFTP Server IP Address?
■
If using older versions of BRICKware for Windows: Does the name of the
configuration file consist of maximum eight characters and the extension of
maximum three characters (when using DIME Tools )?
■
Does the host support TFTP (did you start the TFTP server of DIME Tools
before starting the operation)?
■
Is the source file in the configured directory of the TFTP path of DIME Tools
(when Operation = get)? To change the TFTP path, refer to BRICKware
for Windows.
If no errors are found in the above points, proceed as follows to find the cause
of the problem:
➤
Leave the Setup Tool.
➤
Type in the following in the SNMP shell:
debug config &
.
➤
Reopen the Setup Tool with
setup
.
➤
Carry out the desired operation in C
ONFIGURATION
M
ANAGEMENT
.
If an error occurs, an error message is displayed to indicate the cause.