BinTec X3200, Руководство пользователя

Страница: 166 / 419

166 BinTec Communications AG
Basic Configuration with the Setup Tool
5
Creating routing entry
➤
Press SAVE.
➤
Leave IP
➧
R
OUTING
with EXIT.
➤
Leave IP with EXIT.
Corporate Network Connection Dial-in (without router)
Figure 5-8: Scenario for dial-in
If you have not configured any Internet access, then you can configure a
default route for access to your head office (see
chapter 5.2.1, page 131 ):
➤
Make the following entries in
IP
➧
R
OUTING
➧
ADD:
– Route Type: Default route
– Network: WAN without transit network
– Partner / Interface, e.g. BigBoss
– Metric, e.g.
1
If the corporate network comprises several LANs (subnets) and you do not
configure a default route to head office, then you must create a separate rout-
ing entry for each LAN you want to reach. See instructions in
chapter 5.2.1,
page 131 and figure 5-6, page 153 .
➤
Repeat the steps for creating a routing entry until you have entered all the
necessary routes.
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.254
( 0911/1234567
ISDN
100.100.100.1
GSM
Your Local Area Network
Mobile phone and laptop
Sinlge Workstation
with ISDN card
X3200