BinTec X3200, Руководство пользователя

Страница: 198 / 419

198 BinTec Communications AG
Advanced Configuration
6
Table 6-15: WAN P
ARTNER
➧
A
DD
➧
A
DVANCED
S
ETTINGS
➤
Select Layer 1 Protocol: AO/DI.
➤
Enter Total Number of Channels, e.g. 2 .
➤
Enter Remote X.25 Address, e.g. 019011 .
Control of Bandwidth
On Demand
Proceed as follows to configure BACP/BAP for "AO/DI client" access:
➤
Go to
WAN P
ARTNER
➧
ADD
➧
A
DVANCED
S
ETTINGS
➧
EXTENDED
I
NTERFACE
S
ETTINGS
(
OPTIONAL
).
The following part of the menu is relevant for this configuration step:
Total Number of
Channels Defines the maximum number of channels that
may be opened for dynamic channel bundling.
Possible values for
X3200 : 1 or 2.
Remote X.25 Address X.25 destination address. Appears only if AO/
DI is selected under Layer 1 Protocol.
Field Meaning
Field Meaning
Mode Defines which mode is used for BOD. Only the
BAP, Active Mode setting is used for an AO/DI
client.
Line Utilization
Weighting Weighting within the interval considered for
adding and dropping B-channels (see
table 6-
11, page 189 ).
Line Utilization Sample
(sec) Length of the interval over which the mean of
the measured throughput data is taken and
weighted with Line Utilization Weighting.
Gear Up Threshold Utilization threshold in percent at which another
B-channel is added for a connection. A B-chan-
nel is switched in when the current throughput
of the relevant interface to the connection part-
ner equals or exceeds the Gear Up Threshold
for at least 5 seconds.