BinTec X3200, Руководство пользователя

Страница: 317 / 419

X3200 User’s Guide 317
Administration of Configuration Files
8
Table 8-2: Operation
The State of last operation field can display the following:
Table 8-3: State of last operation
state
(MEMORY --> TFTP) Save all current settings in the memory as
<TFTP File Name> on the TFTP host with the
IP address <TFTP Server IP Address>. <TFTP
File Name> is then overwritten or recreated.
reboot
Restart X3200 . All settings in the memory are
replaced by boot settings from the flash.
Possible Values Meaning
todo The operation has not yet been started.
running The operation is being executed.
done The operation has been executed successfully.
error
The operation could not be fully executed (see
syslog message, cf.
chapter 7.1.1, page 260 ).
Possible Values Meaning
If an error should occur while running get (TFTP --> FLASH) and the operation
is aborted, the file to be overwritten in the flash is deleted. So if you transfer a
"boot" file,
X3200 ’s boot file will be deleted and X3200 cannot load a configura-
tion on restarting. If necessary, rename the file to be transferred!
To run
put (Flash --> TFTP), get (TFTP --> Flash) and state (MEMORY -->
TFTP), you need a TFTP server on the host which you want to transfer a con-
figuration file to or from. Make sure that the TFTP Demon of the destination
system has write access to the TFTP directory.
If the TFTP host is a Windows PC, click Program
➧
BRICKware
➧
DIME
Tools in the Windows Start menu to open DIME Tools and activate the TFTP
server with File
➧
TFTP Server before you run the operation in question.