BERTHOLD TECHNOLOGIES LB 8300, Руководство по эксплуатации

Страница: 24 / 58

4 Installation Rod source shields LB 8300
24
64217BA2 Rev. 00, 10/2017
1
2
3
4
A
Shield
Mounting base
Screw connection
Tilt protection
Distance to container wall
Fig. 6 Installation at containers
j
WARNING
Incorrect assembly may result in accidents.
Incorrect selection of the fastening elements endangers the stability of the
shield.

Use correctly sized and approved mounting elements (mounting base, anti-
tilt, screw connections, screw locks).
5. Screw the shield (Fig. 6, item 1) to the mounting base (Fig. 6, item 2). The
plant operator is responsible for selecting the connection elements (Fig. 6,
item 3), the screw locking and the tightening torque.
6. Secure the shield to the container wall with the anti-tilt device on both sides
(Fig. 6, Pos.4). The plant operator is responsible for selecting the connection
elements (Fig. 6, item 3), the screw locking and the tightening torque.
NOTICE
In the design of the shield it was assumed that the shield is mounted with a
distance A of 20 mm, see Fig. 6.