BERTHOLD TECHNOLOGIES LB 8300, Руководство по эксплуатации

Страница: 37 / 58

Rod source shields LB 8300 6 Maintenance and Repair
64217BA2 Rev. 00, 10/2017
37
6.5.2 Installing the source
To install the source, the following tools are required:
•
pliers to securely grip the source
•
12 mm hexagon wrench to unscrew the screwed sealing plug of the source
holder
•
M3 threaded rod (approx. 50 mm)
To install the source, proceed as follows:
1. If necessary, remove the padlocks (Fig. 14, Pos.3), the fastening bolts (Fig. 14,
Pos.4) and remove the locking plate (Fig. 14, Pos.5).
2. Loosen the screwed sealing plug (Fig. 14, item 1).
3. Remove the O-ring (Fig. 14, Pos.2).
4. Prepare the transport shield with the source to be installed and remove the
cover of the transport shield (Fig. 14, Pos.6).
5. Remove the locking plug (Fig. 14, Pos. 7) to open the transport shield.
1
2
3
4
5
6
7
Screwed sealing plug
Transport shield
Padlock
Fastening bolt
Locking plate
Cover transport shield
Locking plug transport shield
Fig. 14 Prepare the installation